Bronze Cryopump Service
Synergy Cryogenics is the North American Distributor of Sumitomo Heavy Industries (SHI) line of Marathon Cryogenic Pumps and Compressors. We are a division of Synergy Systems Corporation.
Our Total System Support® team supports Oxford-Trillium systems and Brooks-CTI systems in addition to our line of Sumitomo pump and Compressor systems.
- Oxford-Trillium systems and Brooks-CTI systems are serviced by Synergy Cryogenics in Montrose, CO.
- Sumitomo systems are serviced at the Sumitomo Corporation America Inc. (SCAI)-Synergy Cryogenics facility in Allentown, PA.
Turnaround time:
Brooks-CTI Cryopumps with On-Board: Service turnaround time is typically 12 to 18 work days after receipt of goods. Expedited services are available at additional cost.
Oxford-Trillium Cryopumps: Service turnaround time is typically 10 to 15 work days after receipt of goods. Expedited services are available at additional cost.
Sumitomo Marathon Cryopumps: Service turnaround time is typically 10 to 15 working days after receipt of goods. Expedited services are available at additional cost.
| Scope of Work Comparison | |||
| Service Level | BRONZE | SILVER | GOLD |
| Warranty Period 1 | 12 Months | 18 Months | 24 Months |
| Warranty Starts On: | 15/12 | 20/18 | 26/24 |
| (Months from Ship Date / Months from | |||
| Install Date) | |||
| ITEM | Synergy Cryogenics | ||
| 1st Stage Displacer | RAN2 : Replace New / Refurbished | RAN: Replace New / Refurbished | Synergy Proprietary 1st Stage Displacer |
| 2nd Stage Displacer | RAN: Replace New / Refurbished | RAN: Replace New / Refurbished | Synergy Proprietary 2nd Stage Displacer |
| Displacer seals 1st and 2nd | Replace New: Standard Seals | Replace New: Standard Seals | Synergy Proprietary Seals |
| Inlet and Exhaust Valve Bodies | RAN: Replace New / Refurbished | RAN: Replace New / Refurbished | Synergy Proprietary Bodies |
| O-rings | Replace New | Replace New | Replace New |
| Displacer pin | RAN: Replace New / Refurbished | RAN: Replace New / Refurbished | RAN: Replace New / Refurbished |
| Rocker arm bushings | RAN: Replace New | RAN: Replace New | RAN: Replace New |
| Upper and Lower Bushings | Replace New | Replace New | Replace New |
| Kap-seal | Replace New | Replace New | Replace New |
| Kap-seal- gland | RAN | RAN | RAN |
| Compression springs (Valve) | RAN | RAN | RAN |
| Dowel pin | RAN | RAN | RAN |
| Indium gaskets | Replace New | Replace New | Replace New |
| Crankshaft | RAN | RAN | RAN |
| Motor, Valve and Drive Bearings | Replace New | Replace New | Synergy Proprietary Bearings |
| Set valve timing and test inlet valve seal | Yes | Yes | Yes |
| Re-mag or replace motor | RAN | RAN | RAN |
| 15K charcoal array (charcoal array) | Replace New | Replace New | Replace New |
| 80K condensing array (inlet array) | Replace New or Cleaned and Replated | Replace New or Cleaned and Replated | Replace New or Cleaned and Replated |
| Teflon valve stem seal | Replace New | Replace New | Replace New |
| Rocker arms | RAN | RAN | RAN |
| Valve Stems | RAN | RAN | RAN |
| Scotch yoke | RAN | RAN | RAN |
| Radiation Shield | RAN | RAN | RAN |
| Broken Motor Shaft additional charge | YES | YES | YES |
| Missing parts additional charge | YES | YES | YES |
| Silicon Diode or Hydrogen vapor gauge | RAN | RAN | RAN |
| Vacuum Vessel and Coldhead cylinder: | RAN | RAN | RAN |
| Extra Charge for Replacement | |||
| Upgrade to new relief valve and install | RAN | RAN | RAN |
| standpipe filter (reduces particulate on | |||
| the relief valve) | |||
| Vacuum vessel leak test using a helium | Yes | Yes | Yes |
| mass spectrometer | |||
| Bad heater additional | Yes | Yes | Yes |
| Bad OnBoard Module additional | Yes | Yes | Yes |
| Recalibrate Diode | Yes | Yes | Yes |
| Reset Operating Hours | Yes | Yes | Yes |
| Test full On-Board regen functionality | Yes | Yes | Yes |
| Final assembly and inspection | Yes | Yes | Yes |
| Leak Check assembly and test complete pump in a test plate | Yes | Yes | Yes |
| Perform cooldown test and verify conformance time to temperature and vacuum level | Yes | Yes | Yes |
| Results recorded and provided to end user on Certificate of Conformance | Yes | Yes | Yes |
| Pump is sealed to prevent dust and ontamination and packaged in specially designed packaging to minimize risk of damage. | Yes | Yes | Yes |
| NOTE: Warranty Period Subject to Prior Process Analysis: | RAN = Inspect, Replace As Needed | ||
